Messerschmitt Bf-109E-7 TROP S9+CS - 1/32 Suitable for Dragon, Hasegawa, HGW, Hobby 2000 kits. The preparation of the surface prior to the application of the HGW Wet Transfer: The HGW Wet Transfer technology has been tested on Gunze brand paints and preparations. Carry out the test (not on the model), if you are applying to paint made by a different manufacturer. We recommend to spray the surface with a glossy varnish in order to achieve a perfect result. No matter whether you are applying the transfer onto paint or varnish, it is advisable to go over the surface using sandpaper of a grade from 6 000 to 8 000. Naturally, it is also essential to ensure that the base is clean, grease-free and clear of dust. You will need: a scalpel, sharp twee zers, the Mr. Mark Softer product by Gunze, a cotton bud and clean cloth. Step by Step: 1. Cut out the required design using a sharp scalpel. wet-transfers 2. Soak the base paper in warm water (approx. 20 sec). wet-transfers 3. Remove the transfer from the base paper. wet-transfers 4. Apply a layer of Mr. Mark Softer on the surface where you intend to apply the transfer. wet-transfers 5. Place the transfer in the required position on the layer of Mr. Mark Softer. wet-transfers 6. Carefully press out any excess liquid and bubbles. (Use the cloth and the cotton bud.) wet-transfers 7. Ideally, leave it to dry for 6-8 hours. wet-transfers 8. Carefully remove the transparent transfer film. wet-transfers 9. Clean off any traces of transfer glue with a wet cloth.